In case you did not find the PIT file inside any full firmware package, Then you can Download it from (PIT and OPS Files for Samsung Android Mobile Phones). Samsung GT-S7562 Repair (100% Tested) Factory Flash File Free Download.
Firmware Flashing Steps:
- Turn your phone off and remove Sim and Memory Card from it.
- Run Odin program and check the following options:
Auto Reboot - F.Reset Time
- From the Extracted Firmware package you have to select files in the following order to use in Odin program:
Bootloader: BOATLOADER_S7562xxxxxx_...REV02_user_low_noship.ta r.md5
PDA: CODE_S7562xxxxxx_...REV02_user_low_noship.tar.md5
PHONE: MODEM_S7562xxxxxx_...REV02_user_low_noship.tar.md5
CSC: CSC_Oxx_S7562xxxxxx_...REV02_user_low_noship.tar.m d5
- Now put the phone into Download Mode: Press Volume Down key + Home Key + Power Key.
- After you see the Warning message press Volume Up Key to enter Download Mode.
- Connect the phone to your PC via USB cable.
- If your PC starts installing drivers then wait till it is finished.
- Look at Odin's window and make sure it detects the Com port that your phone takes:
If the phone's drivers is installed correctly you will see 0:[COMxx] when xx is the com port number so everything is OK.
- Click Start button to let Odin downloads the selected firmware files into your phone.
- During the update process it is very risky to stop the program or remove USB cable from phone so let it done without any interruption.
- When the update process is done the phone will be rebooted.
- If you see PASS! word at Odin's window then the update was successful.
- Disconnect your phone and wait till it is fully on.
- It is better to do Full Reset by this Code: *2767*3855# and let the phone rebooted.
- Turn your phone off and remove Sim and Memory Card from it.
- Run Odin program and check the following options:
Auto Reboot - F.Reset Time
- From the Extracted Firmware package you have to select files in the following order to use in Odin program:
Bootloader: BOATLOADER_S7562xxxxxx_...REV02_user_low_noship.ta r.md5
PDA: CODE_S7562xxxxxx_...REV02_user_low_noship.tar.md5
PHONE: MODEM_S7562xxxxxx_...REV02_user_low_noship.tar.md5
CSC: CSC_Oxx_S7562xxxxxx_...REV02_user_low_noship.tar.m d5
- Now put the phone into Download Mode: Press Volume Down key + Home Key + Power Key.
- After you see the Warning message press Volume Up Key to enter Download Mode.
- Connect the phone to your PC via USB cable.
- If your PC starts installing drivers then wait till it is finished.
- Look at Odin's window and make sure it detects the Com port that your phone takes:
If the phone's drivers is installed correctly you will see 0:[COMxx] when xx is the com port number so everything is OK.
- Click Start button to let Odin downloads the selected firmware files into your phone.
- During the update process it is very risky to stop the program or remove USB cable from phone so let it done without any interruption.
- When the update process is done the phone will be rebooted.
- If you see PASS! word at Odin's window then the update was successful.
- Disconnect your phone and wait till it is fully on.
- It is better to do Full Reset by this Code: *2767*3855# and let the phone rebooted.